- Home /
- Linear Motion Products /
- Trapezoidal screws /
- Bronze long length flanged nuts
Bronze long length flanged nuts
Material: EN 1982 Cu Sn12-C-CC483K
Flanged Bronze Nut of considerable length 3xTr suitable for operation under high load and/or high movement speed. The special length of 3xTr greatly limits wear. Good lubrication is recommended. Flange dimensions make them fully interchangeable with FTN, HDL, HAL and FCS (total length and flange thickness change).
Select type in the table below
Size Guide
Regular Fit
S | M | L | XL | XXL | |
1/2 CHEST | 52.50 | 54.50 | 56.50 | 59.50 | 62.50 |
BACKLENGTH | 76.00 | 78.00 | 80.00 | 82.00 | 84.00 |
SLEEVELENGTH | 65.00 | 66.00 | 67.00 | 68.50 | 70.00 |
Slim Fit
S | M | L | XL | XXL | |
1/2 CHEST | 50.00 | 52.00 | 54.00 | 58.00 | 62.00 |
BACKLENGTH | 76.00 | 77.00 | 78.00 | 79.00 | 80.00 |
SLEEVELENGTH | 66.00 | 67.00 | 68.00 | 69.00 | 70.00 |
Please note that these measurements are meant as a guide only. Actual garment length and width may vary according to style and brand.
Related Products