Get membership discounts! Register now

THK - GSR linear guide rail

The special feature of GSR linear guides is in the form of the linear carriage or bearing. It is designed so that one side of the carriage is elevated, which allows the preload to be adjusted via an external adjustable screw. The balls run in two tread grooves and are fixed inside the GSR linear carriage. Due to the construction of the linear carriage, it is able to compensate for irregularities and is therefore very suitable for use where it is difficult to ensure high accuracy of the mounting surface. The GSR linear guides model from THK cannot be used in uniaxial applications. Both the carriage and the GSR linear guide rails are completely interchangeable and do not need to be ordered as a set. This allows the storage of linear guide rails of longer lengths that can be cut to a specific length before use. The GSR linear guide model has a low center of gravity with a low overall height, which allows savings in machine size.
Select type in the table below
View File
GSR linear rail THK catalogue
View File
THK Seals & Scraper & Lubricator catalog

Size Guide

Size Guide
Regular Fit
1/2 CHEST 52.50 54.50 56.50 59.50 62.50
BACKLENGTH 76.00 78.00 80.00 82.00 84.00
SLEEVELENGTH 65.00 66.00 67.00 68.50 70.00
Slim Fit
1/2 CHEST 50.00 52.00 54.00 58.00 62.00
BACKLENGTH 76.00 77.00 78.00 79.00 80.00
SLEEVELENGTH 66.00 67.00 68.00 69.00 70.00

Please note that these measurements are meant as a guide only. Actual garment length and width may vary according to style and brand.