- Home /
- Linear Motion Products /
- Linear bushing and shafts /
- Round shaft with support and bearings /
- OPEN LINEAR BUSHING LME UU OP
OPEN LINEAR BUSHING LME UU OP
Open linear bushing LME-OP presents most popular open type linear bearing in Europe. Open type linear bearings are used in linear motion application together with supported linear rails. Open type ball bushing has rubber seals on both ends. Open linear bushings are available in sizes from 12 to 60 mm. Steel outer ring of linear bearing also have groove for circlip which can be used for mounting to the housing.
Select type in the table below
Size Guide
Regular Fit
S | M | L | XL | XXL | |
1/2 CHEST | 52.50 | 54.50 | 56.50 | 59.50 | 62.50 |
BACKLENGTH | 76.00 | 78.00 | 80.00 | 82.00 | 84.00 |
SLEEVELENGTH | 65.00 | 66.00 | 67.00 | 68.50 | 70.00 |
Slim Fit
S | M | L | XL | XXL | |
1/2 CHEST | 50.00 | 52.00 | 54.00 | 58.00 | 62.00 |
BACKLENGTH | 76.00 | 77.00 | 78.00 | 79.00 | 80.00 |
SLEEVELENGTH | 66.00 | 67.00 | 68.00 | 69.00 | 70.00 |
Please note that these measurements are meant as a guide only. Actual garment length and width may vary according to style and brand.
Related Products