- Home /
- Linear Motion Products /
- Trapezoidal screws /
- Hexagonal steel trapezoidal nuts
Hexagonal steel trapezoidal nuts
Hexagonal shaped trapezoidal nuts from steel, available sizes from TR 10x2 up to TR 70x10. Not suitable for operations with high loads, because the coupling steel-steel tends to seize. This nuts can be MIG welded only. Good lubrication is recommended.
Select type in the table below
Size Guide
Regular Fit
S | M | L | XL | XXL | |
1/2 CHEST | 52.50 | 54.50 | 56.50 | 59.50 | 62.50 |
BACKLENGTH | 76.00 | 78.00 | 80.00 | 82.00 | 84.00 |
SLEEVELENGTH | 65.00 | 66.00 | 67.00 | 68.50 | 70.00 |
Slim Fit
S | M | L | XL | XXL | |
1/2 CHEST | 50.00 | 52.00 | 54.00 | 58.00 | 62.00 |
BACKLENGTH | 76.00 | 77.00 | 78.00 | 79.00 | 80.00 |
SLEEVELENGTH | 66.00 | 67.00 | 68.00 | 69.00 | 70.00 |
Please note that these measurements are meant as a guide only. Actual garment length and width may vary according to style and brand.
Related Products