Locks and Latches

Position

• Position
• Name
• Price
• Material (new)
• Ball Size [mm]
• Rail size [mm]
• Shaft Diameter x Lead [mm]
• Size [mm]
• Slot [mm]
• Shaft diameter dr [mm]
• D [mm]
• L [mm]
• C [N]
• Co [N]
• B [mm]
• D1 [mm]
• W [mm]
• A [mm]
• F [mm]
• H [mm]
• d1x d2xh [mm]
• PCD [mm]
• K [mm]
• h1 [mm]
• Ɵ [°]
• Df [mm]
• Dp [mm]
• t [mm]
• X [mm]
• Y [mm]
• Z [mm]
• C [mm]
• I [mm]
• d1 [mm]
• L [mm]
• L1 [mm]
• L2 [mm]
• L3 [mm]
• C1 [mm]
• C2 [mm]
• B [mm]
• H [mm]
• h [mm]
• D [mm]
• G [mm]
• T [mm]
• E [mm]
• S1xe [mm]
• S2 [mm]
• b [mm]
• h [mm]
• B1 [mm]
• H1 [mm]
• E [mm]
• P [mm]
• d2 [mm]
• X [mm]
• Y [mm]
• Z [mm]
• F [mm]
• D g6 [mm]
• PCD [mm]
• T1 [mm]
• Bearing
• S1 [mm]
• S [mm]
• Clamping bolt
• Mounting bolt
• L [mm]
• R [mm]
• J [mm]
• P [mm]
• U [mm]
• Hardening depth Rht DIN 6773 [mm]
• Standard tolerance ISO h6 [μm]
• Roundness (circular) t1 [μm]
• Parallelism (cylindric) t2 [μm]
• Straightness t3 [mm/m]
• A [mm]
• Inner Diameter di (+/-10%) [mm]
• G1 [mm]
• P [mm]
• H [mm]
• W2 [mm]
• E [mm]
• W [mm]
• B [mm]
• J [mm]
• T [mm]
• L [mm]
• L1 [mm]
• Q X l [mm]
• Ø [mm]
• C [kN]
• Co [kN]
• Mx [kNm]
• My [kNm]
• Mz [kNm]
• Diameter x lead
• Material
• Surface hardness after rolling
• Lead accuracy [μm/300 mm]
• Straightness [mm/mm]
• Length [mm]
• Thread direction
• Nut Size [mm]
• Thread direction
• Ballnut size [mm]
• L [mm]
• For screw diameter [mm]
• Servo motor flange D1 [mm] - holes dia. PCD W1 [mm]
• Bores (YES / NO)
• Seal
• Seal
• Radial Clearance
• Bore
• Special