TBI Motion

Profiled Rail System

 

Extensive range of TBI Motion linear guides offer precision and quality at competitive prices suitable for most automation requirements. The design of TBI Motion linear guide rails and block features an equal lead rating in all four directions that request sufficient rigidity load in all directions, and self-aligning capability to absorb installation-error. Moreover, a sufficient preload can be achieved to increase rigidity and makes it suitable for any kind of installation.

Profilna vodilica i ležaj TRH_F

Buy TBI Motion Linear Guides and Ball Screws in Online Shop!
Online Shop

Ball screws and nuts

 

TBI Motion range of ball screw assemblies offer a choice of screw diameters and pitches to suit a wide variety of applications. All single nuts are offered play free. To further compliment the range there are high lead and miniature ball screws. Rigidly selected materials, intensive heat treating and processing techniques, backed by years of experience,have resulted in the most durable ball screws manufactured. With proper lubrication and use,trouble-free operation for an extended period of time is possible.

Kuglično navojno vreteno in matica SFU

Ball Spline

 

The design of TBI Ball spline is to utilize the friction force through the contact of steel balls within in the Spline Nut and the grooves on the Spline Shaft. With TBI MOTION’s unique 40° angular contact design which enables the Ball spline delivers high sensitivity and extreme high load carrying capacity. The concept is optimal for the application involve with high speed, vibrates, impacts of loading and precise positioning requirements. Also when the Ball spline is used to function as linear bushing, the Ball spline provides ten times loading capacity than the linear bushing in the like dimensioned but with a compact profile. Namely, Durability and reliablility is the reason for choosing TBI Ball spline in your application. TBI MOTION Spline Nut is available in two different designs: SLF (Flange design) and SLT (Non-flange design). Point of contacts on the Spline shaft is provided in two grooves (180°) (SLF/SLT6~20) and four grooves (70°) (SLF/SLT25~50) base on the diameter of the Spline shaft. Also TBI provides Hollow Spline shaft for alternative.

BALL SPLINE TBI MOTION

 

 

Haven't found what you'r looking for? Contact us here.

 

Read custumer experiences